TIMKEN M919048/M919010D
Double Row TIMKEN M919048/M919010D Inch Tapered Roller Bearing
TIMKEN M919048/M919010D consists of a single-piece (double)
outer ring M919010D and two single inner ring M919048.
This configuration offers a wide effective bearing spread to support loads created by overturning moments.
TIMKEN M919048/M919010D can be used at fixed positions or allowed to fl oat in the housing bore to compensate for shaft expansion.
D suffi x has a groove with oil holes for lubrication through the outer ring
CD suffi x now replaces the DC suffi x listed for part numbers in previous publications. Same features as D suffi x, but CD also has groove with oil holes. One lubrication hole is counterbored to accept an anti-rotational pin.
Bearing M919048/M919010D Technical Data
| Bearing Part | M919048/M919010D | Bearing type: | Double row tapered roller bearing |
| Brand | TIMKEN | Other | Inch type |
| Inner(Cone) | M919048 | Dynamic C1 | 354000N |
| Outer(Cup) | M919010D | Factors e | 0.73 |
| Bore (d) | 89.98mm | Factors Y | 0.92 |
| O.D (D) | 161.9mm | Dynamic C90 | 52600N |
| Width(T) | 69.85mm | Dynamic Ca90 | 65900N |
| Dynamic C90(2) | 91700N | Factors K | 0.8 |
| Outer Ring Width(C) | 44.45mm | Factors Y2 | 1.37N |
| Origin | USA | Weight: | 5.4kg |
Timken M919048/M919010D Drawing
